DIYonline.com
 You are here:   Login Member Login 
New Membership New Membership 
 Channels:
 Home
 Bath
 Closets & Storage
 Deck & Patio
 Fence & Outdoors
 Hardware & Tools
 Kitchen
 Lawn & Garden
 Paint & Wallpaper
 Power Equipment
 Remodeling
 Safety/Security
 Windows & Doors
 Workshop & Garage

ToolBox:
and more...

 Shortcuts:
 Articles
 Ask the Expert
 Bulletin Boards
 Calculators
 Contests
 Design Tools
Dictionary
How-To Guides
My Projects
Reading List

My Favorites

Members use MyFavorites to tag items of interest. Click to become a member!


   Articles | How-Tos | Ask the Expert   

Repairing Nail Pops

Nail pops are an annoying reality if your walls and/or ceilings are drywall. They are normally caused by seasonal wood movement but can also result from someone running into a wall or a nail slipping. It's one of the better reasons to use screws. Fixing the problem is easy:


Items needed:

Drywall nails or screws
Hammer
Screw Gun
Joint Compound
4" knife.

Safety Suggestions and Tips
Wear safety glasses

Level of difficulty

Time Required:
1 hours

Steps

Make a small dent
Make a small dent

Step 1:

Use a hammer to drive the nail back below the surface. You should leave a small circular dent in the drywall. Make sure you don't pulverize the drywall in the process.


Screw next to loose nail
Screw next to loose nail

Step 2:

Now you need to re-secure the drywall to the studs. There are two methods:

A.  (recommended) Place a drywall screw next to the existing nail and screw it in. The head of the screw should be just below the surface of the drywall.

B.  Place the point of another drywall nail right next to the head of the existing nail. Drive it down into the circular depression you created in step one.


Spread compound
Spread compound

Step 3:

Using some joint compound and a 4" - 6" knife, fill the hole. Work the mud until it is smooth and flush with the surrounding wall. Inspect the joint compound after it has dried, usually the next day. If needed, lightly sand and apply more compound./td>


Finished
Finished

Step 4:

After the patch is dry, you should paint it. You can spot-prime it if you like but if the repair is small enough, this may not be necessary. Be careful how much you paint. If the repair is in a high-traffic area, you may wind up painting the entire wall.



 


[Back to How-Tos] [Printable Page]

You are here:
MYInfoCenter | Customer Care | Company Info | Privacy Policy | Site Resources | FAQs | About This Site | Employment | Site Map